Surface plasmon resonance biosensor for genetically modified organisms detection

The development of a surface plasmon resonance (SPR) affinity biosensor based on DNA hybridisation is described. This biosensor has been applied to genetically modified organisms (GMOs) detection. Single stranded DNA (ssDNA) probes were immobilised on the sensor chip of an SPR device and the hybridisation between the immobilised probe and the complementary sequence (target) was monitored. The probe sequences were internal to the sequence of 35S promoter and NOS terminator which are inserted sequences in the genome of GMO regulating the transgene expression. The system has been optimised using synthetic oligonucleotides, then applied to real samples analysis. Samples, containing the transgenic target sequences, were amplified by polymerase chain reaction (PCR) and then detected with the SPR biosensor.     

Stereoselective synthesis of 3a,7a-dihydro-3H,4H-furo[3,4-c]pyran-1-ones via intramolecular hetero-Diels-Alder reaction

The synthesis of 3a,7a-dihydro-3H,4H-furo[3,4-c]pyran-1-ones via an intramolecular hetero-Diels-Alder reaction of easily accessible α,β-unsaturated γ-ketoesters was investigated. The reaction was found to proceed in a highly stereoselective way leading to single, cis-configured product isomers. The same diastereomer is formed, independently of the configuration of the enone double bond of the precursor. The respective E- and Z-isomers react either through an endo-E-syn or an exo-Z-syn transition state.     

Efficient synthesis of cellulose furoates in 1-<Emphasis Type="Italic">N</Emphasis>-butyl-3-methylimidazolium chloride

The ionic liquid 1-N-butyl-3-methylimidazolium chloride ([C₄mim]⁺Cl⁻) was investigated as reaction media for the homogeneous acylation of cellulose with 2-furoyl chloride in the presence of pyridine. The preparation of cellulose furoate depending on the reaction conditions, the cellulose type and the pyridine content was studied. Cellulose furoates with a degree of substitution in the range from 0.46 to 3.0 were accessible, i.e., under mild conditions, with a low excess of reagent and in a short reaction time. The products were characterized by elemental analysis, perpropionylation, ¹H- and ¹³C NMR spectroscopy and FTIR spectroscopy. Thomas Heinze is the member of the European Polysaccharide Network of Excellence (EPNOE), www.epnoe.eu     

Synthesis and phase transition of Li-Mn-O spinels with high Li/Mn ratio by thermo-decomposition of LiMnC2O4(Ac)

LiMnC₂O₄(Ac) precursor in which Li⁺ and Mn²⁺ were amalgamated in one molecule was prepared by solid-state reaction at room-temperature using manganese acetate, lithium hydroxide and oxalic acid as raw materials. By thermo-decomposition of LiMnC₂O₄(Ac) at various temperatures, a series of Li_1+y[Mn_2−xLi_x]_16dO₄ spinels were prepared with Li₂MnO₃ as impurities. The structure and phase transition of these spinels were investigated by XRD, TG/DTA, average oxidation state of Mn and cyclic voltammeric techniques. Results revealed that the Li-Mn-O spinels with high Li/Mn ratio were unstable at high temperature, and the phase transition was associated with the transfer of Li⁺ from octahedral 16c sites to 16d sites. With the sintering temperature increasing from 450 to 850 °C, the phase structure varied from lithiated-spinel Li₂Mn₂O₄ to Li₄Mn₅O₁₂-like to LiMn₂O₄-like and finally to rock-salt LiMnO₂-like. A way of determining x with average oxidation state of Mn and the content of Li₂MnO₃ was also demonstrated.     

One-pot three-component reaction of isocyanides, dialkyl acetylenedicarboxylates and phthalhydrazide: synthesis of highly functionalized 1H-pyrazolo[1,2-b]phthalazine-5,10-diones

Protonation of the highly reactive 1:1 intermediate produced in the reaction between alkyl isocyanides and electron-deficient acetylenic esters with phthalhydrazide, leads to a vinylisonitrilium cation, which undergoes an addition reaction with the conjugate base of the phthalhydrazide to produce dialkyl 3-(alkylamino)-5,10-dioxo-5,10-dihydro-1H-pyrazolo[1,2-b]phthalazine-1,2-dicarboxylates in fairly good yields at room temperature.     

PPh3催化Mannich反应机理的密度泛函研究

通过密度泛函理论研究了PPh3催化苯胺、苯甲醛和乙酰乙酸乙酯三组分Mannich反应的机理.计算结果表明该机理主要分3个步骤进行:PPh3催化乙酰乙酸乙酯发生酮式-烯醇式互变异构得到烯醇;烯醇辅助苯胺和苯甲醛缩合并脱水生成亚胺;亚胺和烯醇通过加成反应生成β-氨基羰基化合物.通过详细的机理研究,发现烯醇从亚胺的背面进攻其亲电C原子的过渡态的相对能量更低,容易得到反式的产物,对实验观察到的非对映选择性进行了合理的解释.     

单层分散型Pd/Ni双金属催化剂的制备及其催化加氢性能

通过置换反应制备了Pd/Ni双金属催化剂,利用X射线衍射、CO化学吸附和吸附H2的程序升温脱附对其进行了表征,并测定了该催化剂对环己烯、苯乙烯和丙酮气相加氢反应的催化性能.结果发现,在这种催化剂中Pd原子单层分散在金属Ni的表面,因而该催化剂表现出比浸渍法制备的相同Pd含量的Pd/Ni-im和Pd/-γAl2O3催化剂更高的催化加氢活性.     

二氧化碳促进的醛和酮等羰基化合物烯丙基化反应研究

加入二氧化碳可以促进羰基化合物的烯丙基化反应. 实验结果表明: 在1.0 MPa的二氧化碳和2 equiv.的锡存在下, 以THF/H₂O为反应介质, 芳香醛化合物与烯丙基溴可以顺利地发生烯丙基化反应得到较高的产率, 而芳香酮化合物和脂肪醛等与烯丙基溴反应只得到较低的产率.     

Temperature-controlled combustion and kinetics of different rank coal samples

Differential scanning calorimetry (DSC) and thermogravimetry (TG/DTG) has been used to obtain information on the temperature-controlled combustion characteristics of seventeen coals of different origin from Thrace basin of Turkey. Experiments were performed in air atmosphere up to 600°C at a heating rate of 10°C min^-1. The DSC/TG curves clearly demonstrate distinct transitional stages in the entire coal samples studied. Reaction intervals, peak and burn-out temperatures of the coal samples are also determined. Two different kinetic methods known as, Arrhenius and Coats-Redfern, were used to analyze the kinetic data and the results are discussed.     

碳酸二甲酯法合成1,5-萘二氨基甲酸甲酯的反应机理

 应用红外光谱技术研究了在乙酸锌催化作用下1,5-萘二胺与碳酸二甲酯甲氧基羰基化反应机理. 结果表明,二水合乙酸锌只有失去两个结晶水变成无水乙酸锌后才能产生催化活性. 无水乙酸锌与1,5-萘二胺形成一个新的配位络合物,该配位络合物是一个适宜的亲核试剂,能与碳酸二甲酯进行亲核反应,生成1,5-萘二胺的甲氧基羰基化产物. 在无水乙酸锌与1,5-萘二胺形成配位络合物的过程中,无水乙酸锌的结构从双齿型转变成单齿型.